300-430 dumps | CCNP Collaboration 300-430 ENWLSI Certification Exam Best Materials

300-430 ENWLSI is the acronym for Implementing Cisco Enterprise Wireless Networks exam certification, using 300-430 dumps to help you successfully pass the CCNP Collaboration 300-430 ENWLSI Certification Exam on the first attempt.

300-430 ENWLSI Certification Exam is one of the specific topics in the CCNP Collaboration concentration exam, and if you want to be certified by CCNP Collaboration, you will also need to take the CCNP Collaboration Core Exam (350-401 ENCOR), so, I recommend you to use the Lead4Pass 300-430 dumps: https://www.lead4pass.com/300-430.html, to help you pass one of the CCNP Collaboration intensive exams, 350-401 dumps are available in Lead4Pass.

Lead4pass 300-430 exam dumps contain 162 exam questions and answers and provide both PDF and VCE study modes. You just need to practice all the 300-430 dumps questions carefully to make sure you pass the 300-430 ENWLSI Certification Exam with ease.

You can first detect CCNP Collaboration 300-430 free dumps

Updated 2022.7

QUESTION 1:

A Cisco 8540 WLC manages Cisco Aironet 4800 Series APs and sends AoA data to a Cisco CMX 3375 Appliance for Hyperlocation. The load from the WLC is distributed to another virtual CMX server using CMX grouping. The virtual CMX server shows location RSSI data and not Hyperiocation. No AOA metrics are shown on the metrics page of the CMX virtual appliance under System > Metrics > Location Metrics.

How must the network administrator RESOLVE THIS ISSUE?

A. Allow port 2003 for AoA packets to flow through between the CMX appliances.
B. Enable Wireless > Access Points > Global configuration > Enable Hyperlocation on the WLC.
C. Use one Hyperlocation-enabled WL.C and CMX for AoA data
D. Enable the HALO module on the CMX appliance for the data collection

Correct Answer: C

QUESTION 2:

Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

A. Policy Profile
B. AP Join Profile
C. Flex Profile
D. RF Profile

Correct Answer: B

QUESTION 3:

An engineer wants to upgrade the APs in a Cisco FlexConnect group. To accomplish this upgrade, the FlexConnect AP Upgrade setting will be used One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller.

Which action accomplishes this direct upgrade?

A. Reboot all APs before the upgrade.
B. Remove the APs from the group
C. Do not set any master APs. 9 0
D. Allocate the master APs to different groups

Correct Answer: D

QUESTION 4:

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied.

What actions should be taken to resolve this issue?

A. Place the APs to monitor the mode shutdown of the radios, and then change the Cisco Hyperlocation detection threshold

B. Shut down all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.

C. Disable Cisco Hyperlocation. change the Cisco Hyperlocation detection threshold and then enable it

D. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it to the WL AN.

Correct Answer: C

QUESTION 5:

A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC.

Which configuration allows the devices to communicate over NMSP?

A. Allow UDP/16113portonthe central switch.
B. Allow TCP/16666 port on the router.
C. Allow TCP/16113 port on the firewall.
D. Allow UDP/16666 port on the VPN router.

Correct Answer: C

QUESTION 6:

Which devices can be tracked with the Cisco Context-Aware Services?

A. wired and wireless devices
B. wireless devices
C. wired devices
D. Cisco certified wireless devices

Correct Answer: A

QUESTION 7:

A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers.

Which address provides automatic discovery of the best RP for each multicast group?

A. 224.0.0.13
B. 224.0.0.14
C. 224.0.1.39
D. 224.0.1.40

Correct Answer: D

QUESTION 8:

A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails.

Which configuration change resolves this issue?

A. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.

B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.

C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.

D. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.

Correct Answer: C

QUESTION 9:

An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message.

Which action must be taken to resolve authentication?

A. Use the user password that is configured on the server.
B. Disable the server certificate to be validated on the client.
C. Update the client certificate to match the user account.
D. Replace the client certificates from the CA with the server certificate.

Correct Answer: B

QUESTION 10:

An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted.

Which cause of this issue is true?

A. Fallback is enabled
B. Fallback is disabled
C. DNS query is disabled
D. DNS query is enabled

Correct Answer: B

QUESTION 11:

When configuring a Cisco WLC, which CLI command adds a VLAN with a VLAN ID of 30 to a FlexConnect group named BranchA-FCG?

A. config flexconnect BranchA-FCG vlan 30 add
B. config flexconnect group BranchA-FCG vlan add 30
C. config flexconnect group BranchA-FCG vlan 30 add
D. config flexconnect BranchA-FCG vlan add 30

Correct Answer: B

QUESTION 12:

Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints.

Which action efficiently rectifies the issue according to Cisco recommendations?

A. Nothing needed to be added to the Cisco WLC or VLAN interface. The ISE configuration must be fixed.

B. Disable DHCP proxy on the Cisco WLC.

C. Disable DHCP proxy on the Cisco WLC and run the IP helper-address command under the VLAN interface to point to DHCP and the two ISE servers.

D. Keep DHCP proxy enabled on the Cisco WLC and define a helper-address under the VLAN interface to point to the two ISE servers.

Correct Answer: C

QUESTION 13:

The marketing department creates a promotion video for the branch store. Only interested hosts must receive the video over wireless multicast.

What allows this feature?

A. DCA
B. WMM
C. WMF

Correct Answer: C

……

[Google Drive] Download the above CCNP Collaboration 300-430 free dumps:https://drive.google.com/file/d/1UdKgedzgrz8_oUkBjx3kWoKmMv8rrO70/

Click here for 162 latest updates on CCNP Collaboration 300-430 ENWLSI Certification Exam Best Materials.

[Updated 2022.6]300-415 dumps: 10 minutes of study to help you pass the 90-minute exam

Are you ready to take the 300-415 exam?

It only takes 10 minutes of your time:

300-415 dumps: 10 minutes of study to help you pass the 90 minute exam

First of all, you can participate in the exam I made for you to verify your true strength! The February 2022 lead4pass 300-415 dumps have been updated with 212 exam questions. The complete 300-415 exam questions are available in both PDF and VCE formats, We collectively call 300-415 dumps: https://www.lead4pass.com/300-415.html (PDF+VCE). This year includes guaranteed free updates for the next 365 days, 100% guaranteed to help you pass the exam.

[Updated 2022.6] 300-415 Dumps exam questions

QUESTION 1:

An administrator must configure an ACL for traffic coming in from the service-side VPN on a specific WAN device with circuit ID 391897770. Which policy must be used to configure this ACL?

A. local data policy
B. central data policy
C. app-aware policy
D. central control policy

Correct Answer: A

https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book/control-policies.html#c_Localized_Control_Policy_12226.xml

 

QUESTION 2:

A bank is looking for improved customer experience for applications and reduced overhead related to compliance and security. Which key feature or features of the Cisco SD-WAN solution will help the bank to achieve its goals?

A. integration with PaaS providers to offer the best possible application experience

B. QoS includes application prioritization and meeting critical applications SLA for selecting the optimal path.

C. implementation of a modem age core banking system

D. implementation of BGP across the enterprise routing for selecting the optimal path

Correct Answer: B

https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/sd-wan/nb-06-sd-wan-sol-overview-cte-en.html#Uniquecapabilities

 

QUESTION 3:

Which third-party Enterprise CA server must be used for a cloud-based vSmart controller?

A. RootCert
B. VeriSign
C. Microsoft
D. RADIUS

Correct Answer: A

Reference: https://www.nterone.com/articles/cisco-sdwan-viptela-everything-you-wanted-to-know-about-certificates-deployment-but-were-afraid-to-ask

 

QUESTION 4:

Which VPN connects the transport-side WAN Edge interface to the underlay/WAN network?

A. VPN 1
B. VPN 511
C. VPN 0
D. VPN 512

Correct Answer: C

 

QUESTION 5:

What is a default protocol for a control plane connection?

A. HTTPS
B. TLS
C. IPsec
D. DTLS

Correct Answer: D

[Updated 2022.6]: Continue to learn more about Cisco 300-415 exam questions to help you prepare for the 300-415 ENSDWI Exam

Next, take the 300-415 online test:

Answers are announced at the end of the article

QUESTION 1:

Which component of the Cisco SD-WAN secure extensible network provides a single pane of glass approach to network monitoring and configuration?
A. APIC-EM
B. vSmart
C. vManage
D. vBond

QUESTION 2:

300-415 q2

Refer to the exhibit. An engineer is getting a CTORGNMMIS error on a controller connection. Which action resolves this issue?

A. Configure a valid certificate on vSMART.
B. Configure a valid organization name.
C. Configure a valid serial number on the WAN Edge.
D. Configure a valid product ID.

Reference: https://community.cisco.com/t5/networking-documents/sd-wan-routers-troubleshoot-control-connections/tap/3813237

QUESTION 3:

Which attributes are configured to uniquely identify and represent a TLOC route?

A. system IP address, link color, and encapsulation
B. origin, originator, and preference
C. site ID, tag, and VPN
D. firewall, IPS, and application optimization

TLOC routes are the logical tunnel termination points on the vEdge routers that connect into a transport network. A TLOC route is uniquely identified and represented by a three-tuple, consisting of system IP address, link color, and encapsulation (Generic Routing Encapsulation [GRE] or IPSec). In addition to system IP address, color, and encapsulation, TLOC routes also carry attributes such as TLOC private and public IP addresses, carrier, preference, site ID, tag, and weight. For a TLOC to be considered in an active state on a particular vEdge, an active BFD session must be associated with that vEdge TLOC. https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/CVD-SD-WANDesign-2018OCT.pdf

QUESTION 4:

Refer to the exhibit.

300-415 q4

Which command allows traffic through the IPsec tunnel configured in VPN 0?

A. service netsvc1 vpn1
B. service netsvc1 address 1.1.1.1
C. service FW address 1.1.1.1
D. service local

Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge-20-x/policies-book/service/chaining.html

QUESTION 5:

Refer to the exhibit.

300-415 q5

Which configuration configures IPsec tunnels in active and standby?

300-415 q5-1

A. Option A
B. Option B
C. Option C
D. Option D

QUESTION 6:

The network administrator is configuring a QoS scheduling policy on traffic received from transport side tunnels on WAN Edge 5000 routers at location 406141498 Which command must be configured on these devices?

A. cloud-qos
B. service qos
C. cloud-mis qos
D. mis qos

QUESTION 7:

Which feature builds transport redundancy by using the cross link between two redundant WAN Edge routers?

A. OMP
B. zero-touch provisioning
C. quality of service
D. TLOC extension

QUESTION 8:

Which two products that perform lifecycle management for virtual instances are supported by WAN Edge cloud routers? (Choose two.)

A. OpenStack
B. AWS
C. VMware vCenter
D. Azure
E. IBM Cloud

https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/sd-wan/nb-07-cloud-router-data-sheet-cteen.html

300-415 q8

QUESTION 9:

DRAG DROP
Drag and drop the vManage policy configuration procedures from the left onto the correct definitions on the right.
Select and Place:

300-415 q9

Correct Answer:

300-415 q9-1

Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/vedge/policies-book/datapolicies.html

QUESTION 10:

Refer to the exhibit.

300-415 q10

The Cisco SD-WAN network is configured with a default full-mesh topology. Islamabad HQ and Islamabad WAN Edges must be used as the hub sites. Hub sites MPLS TLOC must be preferred when forwarding FTP traffic based on a configured SLA class list. Which policy configuration does the network engineer use to call the SLA class and set the preferred color to MPLS?

A. Centralized Policy, Traffic Policy
B. Centralized Policy, Topology
C. Localized Policy, Forwarding Class
D. Localized Policy, Route Policy

Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-bookxe/centralized-policy.html#Cisco_Concept.dita_d31f22cb-f54f-41df-966a-0ae1ca3c398a

QUESTION 11:

What is an advantage of using auto mode versus static mode of power allocation when an access point is connected o a PoE switch port?

A. It detects the device is a powered device
B. All four pairs of the cable are used
C. Power policing is enabled at the same time
D. The default level is used for the access point

300-415 q11

https://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_011010.html

QUESTION 12:

Which configuration step is taken on vManage after WAN Edge list is uploaded to support the on-boarding process before the device comes online?

A. Verify the device certificate
B. Enable the ZTP process
C. Set the device as valid
D. Send the list to controllers

Reference: https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/sd-wan-wan-edge-onboarding-deployguide-2020jan.pdf

Verify the answer:

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12
CBABCADACIMAGEADC

Alternatively, download the 300-415 PDF: https://drive.google.com/file/d/1Mwt6eLteK5BuS6zTGxmqZbMBb4zJevke/view?usp=sharing

The 300-415 practice test is a very good way to study and can help you improve yourself in the shortest possible time. There are only 12 free test questions above, choose the Lead4Pass 300-415 dumps:https://www.lead4pass.com/300-415.html (Total Questions: 212 Q&A) [Updated 2022.6 Total Questions: 214 Q&A] Choose your preferred method (pdf or VCE). Help you pass the 90-minute exam with ease.

New AZ-900 Dumps Updated [2022] Pass AZ-900 Exam Successfully

How to successfully pass the AZ-900 Microsoft Azure Fundamentals exam?

Lead4Pass provides you with the new Microsoft AZ-900 dumps as a proper prep material to start studying for the Microsoft AZ-900 exam questions and answers.

Covering the latest exam content and exam objectives, the AZ-900 Dumps is an excellent online resource to guarantee you can pass the Microsoft Azure Fundamentals AZ-900 exam.

The AZ-900 free dump is below, as part of the AZ-900 dump to check self

1. This question requires that you evaluate the underlined text to determine if it is correct.
Azure Germany can be used by legal residents of Germany only.

Instructions: Review the underlined text. If it makes the statement correct, select “No change is needed”. If the statement is incorrect, select the answer choice that makes the statement correct.

A. no change is needed
B. only enterprises that are registered in Germany
C. only enterprises that purchase their azure licenses from a partner based in Germany
D. any user or enterprise that requires its data to reside in Germany

2. You plan to migrate a web application to Azure. The web application is accessed by external users.
You need to recommend a cloud deployment solution to minimize the amount of administrative effort used to manage the web application.

What should you include in the recommendation?

A. Software as a Service (SaaS)
B. Platform as a Service (PaaS)
C. Infrastructure as a Service (IaaS)
D. Database as a Service (DaaS)

 

3. You plan to deploy a website to Azure. The website will be accessed by users worldwide and will host large video files.

You need to recommend which Azure feature must be used to provide the best video playback experience.

What should you recommend?

A. an application gateway
B. an Azure ExpressRoute circuit
C. a content delivery network (CDN)
D. an Azure Traffic Manager profile

 

4. HOTSPOT

You plan to extend your company\\’s network to Azure. The network contains a VPN appliance that uses an IP address of 131.107.200.1.

You need to create an Azure resource that identifies the VPN appliance.

Which Azure resource should you create? To answer, select the appropriate resource in the answer area.
Hot Area:

az-900 exam questions 4

Correct Answer:

az-900 exam questions 4-1

 

5. HOTSPOT

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 5

Correct Answer:

az-900 exam questions 5-1

 

6. Your company plans to move several servers to Azure.
The company\\’s compliance policy states that a server named FinServer must be on a separate network segment.

You are evaluating which Azure services can be used to meet the compliance policy requirements.

Which Azure solution should you recommend?

A. a resource group for FinServer and another resource group for all the other servers
B. a virtual network for FinServer and another virtual network for all the other servers
C. a VPN for FinServer and a virtual network gateway for each other server
D. one resource group for all the servers and a resource lock for FinServer

 

7. HOTSPOT

Which cloud deployment solution is used for Azure virtual machines and Azure SQL databases? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 7

Correct Answer:

az-900 exam questions 7-1

 

8. A team of developers at your company plans to deploy, and then remove, 50 virtual machines each week. All the virtual machines are configured by using Azure Resource Manager templates.

You need to recommend which Azure service will minimize the administrative effort required to deploy and remove the virtual machines.

What should you recommend?

A. Azure Reserved Virtual Machines (VM) Instances
B. Azure DevTest Labs
C. Azure virtual machine scale sets
D. Microsoft Managed Desktop

 

9. HOTSPOT

How should you calculate the monthly uptime percentage? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 9

Correct Answer:

az-900 exam questions 9-1

“Maximum Available Minutes” is the total accumulated minutes during a billing month .
“Downtime” is the total accumulated minutes that are part of Maximum Available Minutes where a system is unavailable.

“Monthly Uptime Percentage” for a service is calculated as Maximum Available Minutes less Downtime divided by Maximum Available Minutes x 100.

Monthly Uptime Percentage is represented by the following formula:
Monthly Uptime % = (Maximum Available Minutes-Downtime) / Maximum Available Minutes x 100.

 

10. Which Azure service should you use to store certificates?

A. Azure Security Center
B. an Azure Storage account
C. Azure Key Vault
D. Azure Information Protection


11. For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 11

Correct Answer:

az-900 exam questions 11-1

 

12. This question requires that you evaluate the Bold text to determine if it is correct.

From Azure Cloud Shell , you can track your company\\’s regulatory standards and regulations, such as ISO 27001.

Instructions: Review the underlined text. If it makes the statement correct, select “No change is needed/\\’ If the statement is incorrect, select the answer choice that makes the statement correct.

A. No change is needed.
B. the Microsoft Cloud Partner Portal
C. Compliance Manager
D. the Trust Center


13. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an Azure environment. You need to create a new Azure virtual machine from an Android laptop.

Solution: You use the Azure portal.

Does this meet the goal?

A. Yes
B. No

 

14. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You plan to deploy several Azure virtual machines.

You need to ensure that the services running on the virtual machines are available if a single data center fails.

Solution: You deploy the virtual machines to two or more resource groups.

Does this meet the goal?

A. Yes
B. No

 

15. This question requires that you evaluate the underlined text to determine if it is correct.
If a resource group named RG1 has a delete lock, only a member of the global administrators group can delete RG1.

Instructions: Review the underlined text. If it makes the statement correct, select “No change is needed”. If the statement is incorrect, select the answer choice that makes the statement correct.

A. No change is needed
B. the delete lock must be removed before an administrator
C. an Azure policy must be modified before an administrator
D. an Azure tag must be added before an administrator

 

16. Which two types of customers are eligible to use Azure Government to develop a cloud solution? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

A. a Canadian government contractor
B. a European government contractor
C. a United States government entity
D. a United States government contractor
E. a European government entity

17. HOTSPOT

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 17

Correct Answer:

az-900 exam questions 17-1

 

18. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You plan to deploy several Azure virtual machines.

You need to ensure that the services running on the virtual machines are available if a single data center fails.

Solution: You deploy the virtual machines to two or more scale sets.

Does this meet the goal?

A. Yes
B. No

 

19. HOTSPOT

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 19

Correct Answer:

az-900 exam questions 19-1

 

20. HOTSPOT

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

Hot Area:

az-900 exam questions 20

Correct Answer:

az-900 exam questions 20-1

Verify answer

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12Q13Q14Q15Q16Q17Q18Q19Q20
DBCIMAGEIMAGEBIMAGEBIMAGECIMAGEAABBCDIMAGEBIMAGEIMAGE
refrefrefrefrefrefrefrefref

More Microsoft AZ-900 Free Dumps Learning Ways Available

Microsoft AZ-900 PDF: https://drive.google.com/file/d/1nbGJM3GOBBnXVt25ndxP0zVwql-45WoX/view?usp=sharing

Microsoft AZ-900 Youtube:

[2022] New AZ-900 Dumps: https://www.lead4pass.com/az-900.html (Total Questions: 397 Q&A)

Real and effective new Microsoft AZ-900 Dumps exam question preparation material to help you pass the exam with ease.

Latest Updated Microsoft DP-420 Dumps: Over 700 points plan

If you can get 700 points or above, you can get DP-420 certification, Exam DP-420: Designing and Implementing Cloud-Native Applications Using Microsoft Azure Cosmos DB (beta)
It is a new test item added in 2021-2022. Participating in the DP-420 exam plan will help you pass the test easily:

dp-420 exam plan

What is the DP-420 Exam Program?

The first step is to take the DP-420 online exam test to improve your skills and verify your exam strength.

Step 2 Download Lead4Pass DP-420 dumps: https://www.lead4pass.com/dp-420.html (PDF+VCE), get complete exam questions to help you pass the exam 100%

Let’s follow the steps to complete the DP-420 exam plan:

DP-420 Online Exam Test:

Note: Answers are announced at the end of the article

2022 DP-420 [Q1]:

HOTSPOT
You have an Azure Cosmos DB Core (SQL) API account named account1.
You have the Azure virtual networks and subnets shown in the following table.

dp-420 q1

The vnet1 and vnet2 networks are connected by using a virtual network peer.
The Firewall and virtual network settings for account1 are configured as shown in the exhibit.

dp-420 q1-1

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q1-2

Correct Answer:

dp-420 q1-3

Box 1: Yes
VM1 is on vnet1.subnet1 which has the Endpoint Status enabled.
Box 2: No
Only virtual network and their subnets added to Azure Cosmos account have access. Their peered VNets cannot
access the account until the subnets within peered virtual networks are added to the account.
Box 3: No
Only virtual network and their subnets added to Azure Cosmos account have access.
Reference:
https://docs.microsoft.com/en-us/azure/cosmos-db/how-to-configure-vnet-service-endpoint

2022 DP-420 [Q2]:

HOTSPOT
You have a container named container1 in an Azure Cosmos DB Core (SQL) API account.
The following is a sample of a document in container1.
{
“studentId”: “631282”,
“firstName”: “James”,
“lastName”: “Smith”,
“enrollmentYear”: 1990,
“isActivelyEnrolled”: true,
“address”: {
“street”: “”,
“city”: “”,
“stateProvince”: “”,
“postal”: “”,
}
}
The container1 container has the following indexing policy.
{
“indexingMode”: “consistent”,
“includePaths”: [
{
“path”: “/*”
},
{
“path”: “/address/city/?”
}
],
“excludePaths”: [
{
“path”: “/address/*”
},
{
“path”: “/firstName/?”
}
]
}
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q2

Correct Answer:

dp-420 q2-1

Box 1: Yes
“path”: “/*” is in includePaths.
Include the root path to selectively exclude paths that don\\’t need to be indexed. This is the recommended approach as
it lets Azure Cosmos DB proactively index any new property that may be added to your model.
Box 2: No
“path”: “/firstName/?” is in excludePaths.
Box 3: Yes
“path”: “/address/city/?” is in includePaths
Reference:
https://docs.microsoft.com/en-us/azure/cosmos-db/index-policy

2022 DP-420 [Q3]:

HOTSPOT
You have the indexing policy shown in the following exhibit.

dp-420 q3

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q3-1

Correct Answer:

dp-420 q3-2

Box 1: ORDER BY c.name DESC, c.age DESC
Queries that have an ORDER BY clause with two or more properties require a composite index.
The following considerations are used when using composite indexes for queries with an ORDER BY clause with two or
more properties:

1. If the composite index paths do not match the sequence of the properties in the ORDER BY clause, then the composite index can\\’t support the query.

2. The order of composite index paths (ascending or descending) should also match the order in the ORDER BY clause.

3. The composite index also supports an ORDER BY clause with the opposite order on all paths.

Box 2: At the same time as the item creation Azure Cosmos DB supports two indexing modes:

1. Consistent: The index is updated synchronously as you create, update or delete items. This means that the consistency of your read queries will be the consistency configured for the account.

2. None: Indexing is disabled on the container.
Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/index-policy

2022 DP-420 [Q4]:

You have an Azure Cosmos DB Core (SQL) API account.
You configure the diagnostic settings to send all log information to a Log Analytics workspace.
You need to identify when the provisioned request units per second (RU/s) for resources within the account were modified.
You write the following query.
AzureDiagnostics
| where Category == “ControlPlaneRequests”
What should you include in the query?

A. | where OperationName startswith “AccountUpdateStart”
B. | where OperationName startswith “SqlContainersDelete”
C. | where OperationName startswith “MongoCollectionsThroughputUpdate”
D. | where OperationName startswith “SqlContainersThroughputUpdate”

The following are the operation names in diagnostic logs for different operations:

1. RegionAddStart, RegionAddComplete
2. RegionRemoveStart, RegionRemoveComplete
3. AccountDeleteStart, AccountDeleteComplete
4. RegionFailoverStart, RegionFailoverComplete
5. AccountCreateStart, AccountCreateComplete
6. *AccountUpdateStart*, AccountUpdateComplete
7. VirtualNetworkDeleteStart, VirtualNetworkDeleteComplete
8. DiagnosticLogUpdateStart, DiagnosticLogUpdateComplete

Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/audit-control-plane-logs

2022 DP-420 [Q5]:

HOTSPOT
You have a database named telemetry in an Azure Cosmos DB Core (SQL) API account that stores IoT data. The database contains two containers named readings and devices.
Documents in readings have the following structure.

1. id
2. deviceid
3. timestamp
4. ownerid
5. measures (array)

-type
-value
-metricid

Documents in devices have the following structure.
id deviceid owner

– ownerid
-emailaddress
-name brand model

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q5

Correct Answer:

dp-420 q5-1

Box 1: Yes
Need to join readings and devices.

Box 2: No
Only readings is required. All required fields are in readings.

Box 3: No
Only devices is required. All required fields are in devices.

2022 DP-420 [Q6]:

HOTSPOT
You have an Azure Cosmos DB Core (SQL) API account named account1.
In account1, you run the following query in a container that contains 100GB of data.
SELECT *
FROM c
WHERE LOWER(c.categoryid) = “hockey”
You view the following metrics while performing the query.

dp-420 q6

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q6-1

Correct Answer:

dp-420 q6-2

Box 1: No
Each physical partition should have its own index, but since no index is used, the query is not cross-partition.

Box 2: No
Index utilization is 0% and Index Look up time is also zero.

Box 3: Yes
A partition key index will be created, and the query will perform across the partitions.

Reference:
https://docs.microsoft.com/en-us/azure/cosmos-db/sql/how-to-query-container

2022 DP-420 [Q7]:

You have an Azure Cosmos DB Core (SQL) API account.
You run the following query against a container in the account.
SELECT
IS_NUMBER(“1234”) AS A,
IS_NUMBER({prop: 1234}) AS C
What is the output of the query?

A. [{“A”: false, “B”: true, “C”: false}]
B. [{“A”: true, “B”: false, “C”: true}]
C. [{“A”: true, “B”: true, “C”: false}]
D. [{“A”: true, “B”: true, “C”: true}]

IS_NUMBER returns a Boolean value indicating if the type of the specified expression is a number. “1234” is a string, not a number.
Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/sql/sql-query-is-number

2022 DP-420 [Q8]:

You maintain a relational database for a book publisher. The database contains the following tables.

dp-420 q8

The most common query lists the books for a given authorId.
You need to develop a non-relational data model for Azure Cosmos DB Core (SQL) API that will replace the relational database. The solution must minimize latency and read operation costs.
What should you include in the solution?

A. Create a container for Author and a container for Book. In each Author document, embed bookId for each book by the author. In each Book document embed authorIdof each author.

B. Create Author, Book, and Bookauthorlnk documents in the same container.

C. Create a container that contains a document for each Author and a document for each Book. In each Book document, embed authorId.

D. Create a container for Author and a container for Book. In each Author document and Book document embed the data from Bookauthorlnk.
Store multiple entity types in the same container.

2022 DP-420 [Q9]:

You are designing an Azure Cosmos DB Core (SQL) API solution to store data from IoT devices. Writes from the devices will be occur every second. The following is a sample of the data.

dp-420 q9

You need to select a partition key that meets the following requirements for writes:

1. Minimizes the partition skew
2. Avoids capacity limits
3. Avoids hot partitions What should you do?

A. Use timestampas the partition key.
B. Create a new synthetic key that contains deviceIdand sensor1Value.
C. Create a new synthetic key that contains deviceIdand deviceManufacturer.
D. Create a new synthetic key that contains deviceIdand a random number.

Use a partition key with a random suffix. Distribute the workload more evenly is to append a random number at the end of the partition key value. When you distribute items in this way, you can perform parallel write operations across partitions.
Incorrect Answers:

A: You will also not like to partition the data on “DateTime”, because this will create a hot partition. Imagine you have partitioned the data on time, then for a given minute, all the calls will hit one partition. If you need to retrieve the data for a customer, then it will be a fan-out query because data may be distributed on all the partitions.

B: Senser1Value has only two values.

C: All the devices could have the same manufacturer.
Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/sql/synthetic-partition-keys

2022 DP-420 [Q10]:

HOTSPOT
You have an Azure Cosmos DB Core (SQL) API account named storage1 that uses provisioned throughput capacity mode.
The storage1 account contains the databases shown in the following table.

dp-420 q10

The databases contain the containers shown in the following table.

dp-420 q10-1

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q10-2

Correct Answer:

dp-420 q10-3

Box 1: No
Four containers with 1000 RU/s each.

Box 2: No
Max 8000 RU/s for db2. 8 containers, so 1000 RU/s for each container.

Box 3: Yes
Max 8000 RU/s for db2. 8 containers, so 1000 RU/s for each container. Can very well add an additional container.
Reference:
https://docs.microsoft.com/en-us/azure/cosmos-db/plan-manage-costs
https://azure.microsoft.com/en-us/pricing/details/cosmos-db/

2022 DP-420 [Q11]:

You have a database in an Azure Cosmos DB Core (SQL) API account.
You need to create an Azure function that will access the database to retrieve records based on a variable named accountnumber. The solution must protect against SQL injection attacks.
How should you define the command statement in the function?

A. cmd = “SELECT * FROM Persons pWHERE p.accountnumber = \\’accountnumber\\'”
B. cmd = “SELECT * FROM Persons pWHERE p.accountnumber = LIKE @accountnumber”
C. cmd = “SELECT * FROM Persons pWHERE p.accountnumber = @accountnumber”
D. cmd = “SELECT * FROM Persons pWHERE p.accountnumber = \\'” + accountnumber + “\\'”

Azure Cosmos DB supports queries with parameters expressed by the familiar @ notation. Parameterized SQL provides robust handling and escaping of user input, and prevents accidental exposure of data through SQL injection.
For example, you can write a query that takes lastName and address.state as parameters, and execute it for various values of lastName and address.state based on user input.
SELECT *
FROM Families f
WHERE f.lastName = @lastName AND f.address.state = @addressState
Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/sql/sql-query-parameterized-queries

2022 DP-420 [Q12]:

HOTSPOT
You have an Azure Cosmos DB Core (SQL) account that has a single write region in West Europe.
You run the following Azure CLI script.

dp-420 q12

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:

dp-420 q12-1

Correct Answer:

dp-420 q12-2

Box 1: Yes
The Automatic failover option allows Azure Cosmos DB to failover to the region with the highest failover priority with no user action should a region become unavailable.

Box 2: No
West Europe is used for failover. Only North Europe is writable.
To Configure multi-region set UseMultipleWriteLocations to true.

Box 3: Yes
Provisioned throughput with single write region costs $0.008/hour per 100 RU/s and provisioned throughput with multiple writable regions costs $0.016/per hour per 100 RU/s.

Reference: https://docs.microsoft.com/en-us/azure/cosmos-db/sql/how-to-multi-master https://docs.microsoft.com/enus/azure/cosmos-db/optimize-cost-regions

Publish the answer:

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12
IMAGEIMAGEIMAGEAIMAGEIMAGEAADIMAGECIMAGE

More learning methods (PDF, Youtube):

500-220 Youtube

DP-420 Exam Questions Youtube:

500-220 pdf

DP-420 Exam Questions Youtube:

Download the free DP-420 exam PDF: https://drive.google.com/file/d/1ZQKrYiGhGlUyQJFZm-RKifvE9c9NnQTI/view?usp=sharing

We share 12 newly updated DP-420 exam questions for free, making and sharing is not easy, so if you want to get the full exam questions please download the Lead4Pass DP-420 dumps https://www.lead4pass.com/dp-420.html (Total Questions: 51 Q&A).
All exam questions are updated throughout the year, real and effective, and 100% pass the exam is guaranteed.

Latest Updated Microsoft MD-100 Certification with Actual Questions
microsoft md-100 actual questions

Windows 10 Certification “MD-100”, participate in the online MD-100 certification test to take you an in-depth understanding of Windows 10 exams. Pass the exam and get the Modern Desktop Administrator Associate certification! To pass the exam, you need to know Deploy Windows, Manage devices and data, Configure storage and connectivity, Maintain Windows. These are all necessary knowledge. The exam itself just checks your ability to complete the task.

The complete latest actual issue of Microsoft MD-100 is here https://www.lead4pass.com/md-100.html (Total Questions: 301 Q&A)

The MD-101 exam is related to MD-100 Microsoft 365 Certified: Modern Desktop Administrator Associate is another in-depth exam for Windows that expands the knowledge of MD-100. More about Microsoft 365 certification can enhance your more skill packs!

The complete latest actual issue of Microsoft MD-101 is here https://www.lead4pass.com/md-101.html (Total Questions: 320 Q&A)

Microsoft MD-100 actual problems

Share a part for free and compare the answers at the end of the article

QUESTION 1

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.

You deploy Windows 10 to a computer named Computer1.
Computer1 contains a folder named C:\Folder1. Folder1 contains multiple documents.
You need to ensure that you can recover the files in Folder1 by using the Previous Versions tab.
Solution: You set up Backup and Restore (Windows 7) and include Folder1 in the backup. Does this meet the goal?

A. Yes
B. No

Reference: https://www.tenforums.com/tutorials/79490-restore-previous-versions-files-folders-drives-windows-10-a.html
https://support.microsoft.com/en-za/help/17128/windows-8-file-history

 

QUESTION 2

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.

You have a computer that runs Windows 10. The computer contains a folder. The folder contains sensitive data.
You need to log which user reads the contents of the folder and modifies and deletes files in the folder.
Solution: From the properties of the folder, you configure the Auditing settings and from Audit Policy in the local Group Policy, you configure Audit object access.

Does this meet the goal?

A. Yes
B. No

Files and folders are objects and are audited through object access.
References: https://www.netwrix.com/how_to_detect_who_changed_file_or_folder_owner.html

 

QUESTION 3

You need to ensure that all the current and future users in the Active Directory domain can establish Remote Desktop
connections to Client1. The solution must use the principle of least privilege.
To complete this task, sign in to the required computer or computers.
Correct Answer: See below.

Step 1. Add Remote Desktop Users to the Remote Desktop Users Group.

1. Open Server Manager.

2.From Tools menu, select Active Directory Users and Computers

3.Double click at your domain on the left and then select Builtin.

4.Open Remote Desktop Users on the right pane.

5.At Members tab, click Add.

6.Type the AD users that you want to give Remote access to the RDS Server and click OK.

7.After selecting the remote desktop users, click OK again to close the window.

Step 2. Allow the log on through remote desktop Services.

1. Open Group Policy Editor. To do that:

a.Simultaneously press the Windows + R keys to open run command box.

b.Type gpedit.msc and press Enter.

2.In Group Policy Editor navigate to: Computer Configuration > Windows Settings > Security Settings > Local Policies >
User Rights Assignment.

3.At the right Pane: double click at Allow log on through Remote Desktop Services.

4.Click Add User or Group.

5.Type remote and then click Check Names.

6.Select the Remote Desktop Users and click OK.

7.Click OK at \\’Select users, computers…\\’ window.

8.Finally click OK again and close Group Policy Editor.

Reference: https://www.wintips.org/fix-to-sign-in-remotely-you-need-the-right-to-sign-in-through-remote-desktopservices-server-2016/

 

QUESTION 4

You need to create an HTML report that shows which policies and policy settings are applied to CONTOSO\User1 on
Client1. You must save the output to a file named Report.html in a folder named Folder1 on the C drive of Client1.
To complete this task, sign in to the required computer or computers.
Correct Answer: See below.
On Client1, log in as administrator. Open command prompt and type:
gpresult /h CONTOSO\User1\C:\Folder1\Report.html

Reference: https://www.google.co.za/search?biw=1366andbih=614andsxsrf=ALeKk01XD_luAn4X-bIMllUjpYBm0i7btQ
%3A1592996005097andei=pTDzXqLCBaif1fAP1NODqAYandq=gpresult+%2Fh+report.html+locationandoq=gpresult+html+report +andgs_lcp=CgZwc3ktYWIQARgEMgIIADICCAAyBggAEBYQHjIGCAAQFhAeMgYIABAWEB4yBggAEBYQH
jIGCAAQFhAeMgYIABAWEB4yCAgAEBYQChAeMgYIABAWEB46BAgAEEdQyOUnWMjlJ2CRhihoAHACeACAAZIDiA
GSA5IBAzQtM ZgBAKABAaoBB2d3cy13aXoandsclient=psy-ab

 

QUESTION 5

SIMULATION
You have a computer named Computer1 that runs Windows 10.
Computer1 has a folder named C:\Folder1.
You need to meet the following requirements:

1.Provide a user named Jon Ross with the ability to modify the permissions of C:\Folder1.

2.Ensure that the principle of least privilege is maintained. What should you do?
To complete this task, sign in to the required computer or computers.

A. See below.

In Windows Explorer, right-click the C:\Folder1 folder, and then click Properties.
Click on the Security tab, and then click Edit.
In the Permissions dialog box, add Jon Ross.
Specify the Allow Modify permissions for the Jon Ross.
Click OK twice to close the Security dialog box.
Click OK twice to close the Properties dialog box.

Reference:
https://docs.microsoft.com/en-us/iis/web-hosting/configuring-servers-in-the-windows-web-platform/configuring-shareand-ntfs-permissions

 

QUESTION 6

You need to meet the technical requirements for the helpdesk users.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

microsoft md-100 actual questions q6

Correct Answer:

microsoft md-100 actual questions q6-1

References: https://www.itprotoday.com/compute-engines/what-group-policy-creator-owners-group

 

QUESTION 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen. Your network contains an Active Directory domain named contoso.com. The domain
contains the users shown in the following table.

microsoft md-100 actual questions q7

You have a computer named Computer1 that runs Windows 10 and is in a workgroup.
A local standard user on Computer1 named User1 joins the computer to the domain and uses the credentials of User2
when prompted.

You need to ensure that you can rename Computer1 as Computer33.
Solution: You use the credentials of User3 on Computer1.

Does this meet the goal?

A. Yes
B. No

Renaming a domain-joined computer will also rename the computer account in the domain. To do this, you need
domain administrator privileges.
User3 is a domain administrator.

References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directory-securitygroups#bkmk-domainadmins

 

QUESTION 8

You are troubleshooting Windows 10 updates that fail to install on a computer that runs Windows 10.
You delete the contents of the SoftwareDistribution folder.
You need to delete the signatures of the Windows Update packages.
Which folder should you delete?

A. %systemroot%\system32\catroot2
B. %systemdrive%\recovery
C. %systemroot%\WinSxS
D. %systemdrive%\System Volume Information

References: https://tipsmake.com/how-to-delete-pending-updates-on-windows-10

 

QUESTION 9

You need to enable BitLocker Drive Encryption (BitLocker) on a computer named Computer1 that runs Windows 10.
Computer1 has the following configurations:

1.Contains only one 200-GB NTFS volume named C:\

2.Contains 50 GB of unallocated disk space

3.Is the member of a workgroup

4.Has TPM enabled What should you do first?

A. Create a VHD.
B. Disable TPM.
C. Create an additional volume.
D. Join Computer1 to an Azure Active Directory (Azure AD) tenant.

Two partitions are required to run BitLocker because pre-startup authentication and system integrity verification must
occur on a separate partition from the encrypted operating system drive. This configuration helps protect the operating system and the information in the encrypted drive.

Reference:
https://docs.microsoft.com/en-us/windows/security/information-protection/bitlocker/bitlocker-overview-and-requirementsfaq

 

QUESTION 10

Your company has a main office and a branch office. The offices connect to each other by using a WAN link. Access to
the Internet is provided through the main office.
The branch office contains 25 computers that run Windows 10. The computers contain small hard drives that have very
little free disk space.

You need to prevent the computers in the branch office from downloading updates from peers on the network.
What should you do?

A. From the Settings app, modify the Delivery Optimizations settings.
B. Configure the network connections as metered connections.
C. Configure the computers to use BranchCache in hosted cache mode.
D. Configure the updates to use the Semi-Annual Channel (Targeted) channel.

References: https://docs.microsoft.com/en-us/windows/deployment/update/waas-branchcache

 

QUESTION 11

HOTSPOT
Your network contains an Active Directory domain that contains the objects shown in the following table.

microsoft md-100 actual questions q11

Computer1 contains the shared folders shown in the following table.

microsoft md-100 actual questions q11-1

The computers have the network configurations shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct
selection is worth one point.
Hot Area:

microsoft md-100 actual questions q11-2

Correct Answer:

microsoft md-100 actual questions q11-3

Box 1: Yes
User1 is in Group1 which has permission to access the share so the share will be visible.
Box 2: No
User2 is in Group2 which does not have permission to access Share1. Access-based enumeration is enabled so
Share1 will not be listed as User2 does not have permission to access it.
Box 3: No
Share2$ is a hidden share (dollar sign appended) so the share will never be listed.

 

QUESTION 12

Your company has a wireless access point that uses WPA2-Enterprise. You need to configure a computer to connect to
the wireless access point. What should you do first?

A. Create a provisioning package in Windows Configuration Designer.
B. Request a passphrase.
C. Request and install a certificate.
D. Create a Connection Manager Administration Kit (CMAK) package.

References: https://support.microsoft.com/en-za/help/17137/windows-setting-up-wireless-network

 

QUESTION 13

You need to connect to your company\\’s network and create a VPN connection on Client2 named VPN1 that meets the following requirements:
VPN1 must connect to a server named vpn.contoso.com.
Only traffic to your company\\’s network must be routed through VPN1.
To complete this task, sign in to the required computer or computers.
Correct Answer: See below.

1.On Client2, click on the Start button and go to settings.

2.Select Network and Internet.

3.Select VPN on the left-hand side

4.Click on the Add a VPN connection button.

5.Next, select the VPN provider–This will almost always be Windows (built-in).

6.Name your connection and enter the server name as provided by your IT technician. (VPN1 and vpn.contoso.com).

7.Add in your username and password as provided by your IT technician.

8.Click Save when done.

9.Closeout the PC settings windows.

Reference: https://www.themillergroup.com/vpn-windows-10/

Comparing results:

Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12Q13
AASee belowSee belowSee belowIMAGEAACCIMAGEB See below

More Microsoft MD-100 practical exam questions: https://www.lead4pass.com/md-100.html (Total Questions: 301 Q&A)

Microsoft MD-100 actual Exam PDF

Google Drive: https://drive.google.com/file/d/1-X1e6b3-2JZITv7DCMSuiAIfz5cAAZsD/view?usp=sharing

Thank you so much for reading! Certification will help you a lot, let us all work easily! Obtaining Microsoft certification is a very proud thing! It is also a permanent skill that accompanies us. Good luck as always!

PS. More Microsoft certification exam content will be updated in https://www.fulldumps.com/!

[Cisco CCNP] Get the latest updated Cisco 300-720 exam dumps online

Lead4Pass has updated the latest valid Cisco 300-720 exam questions and answers. All exam questions have been verified to ensure successful passing of the exam.
Lead4pass 300-720 dumps https://www.lead4pass.com/300-720.html (Total Questions: 94 Q&A). With many years of exam experience, 99.5% of the exam pass rate.
You can experience part of the exam practice questions shared by Lead4Pass online for free.

Free share part of Cisco SOA-C01 exam pdf

The free Cisco 300-720 exam PDF is shared from Lead4Pass. You can download the practice online. To get the complete Cisco 300-720 exam questions and answers, please choose Lead4Pass.
We update all exam questions and answers in real-time throughout the year to ensure immediate validity.

Cisco 300-720 exam practice questions and answers come from Lead4Pass and share a part for free

QUESTION 1
An administrator needs to configure Cisco ESA to ensure that emails are sent and authorized by the owner of the
domain. Which two steps must be performed to accomplish this task? (Choose two.)
A. Generate keys.
B. Create signing profile.
C. Create Mx record.
D. Enable SPF verification.
E. Create DMARC profile.
Correct Answer: DE

QUESTION 2
Which two statements about configuring message filters within the Cisco ESA are true? (Choose two.)
A. The filters command executed from the CLI is used to configure the message filters.
B. Message filters configuration within the web user interface is located within Incoming Content Filters.
C. The filterconfig command executed from the CLI is used to configure message filters.
D. Message filters can be configured only from the CLI.
E. Message filters can be configured only from the web user interface.
Correct Answer: AD
Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/213940-esa-using-a-messagefilter-to-take-act.html

QUESTION 3
Which setting affects the aggressiveness of spam detection?
A. protection level
B. spam threshold
C. spam timeout
D. maximum depth of recursion scan
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118220-technote-esa-00.html

QUESTION 4
Which feature must be enabled first when URL logging is configured on a Cisco ESA?
A. antivirus
B. antispam
C. senderbase reputation filter
D. virus outbreak filter
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118775-technoteesa-00.html#:~:text=In%20order%20to%20implement%20URL,CLI%20by%20the%20ESA%20administrator.

QUESTION 5
Which feature utilizes sensor information obtained from Talos intelligence to filter email servers connecting into the
Cisco ESA?
A. SenderBase Reputation Filtering
B. Connection Reputation Filtering
C. Talos Reputation Filtering
D. SpamCop Reputation Filtering
Correct Answer: A

QUESTION 6
An engineer is configuring a Cisco ESA for the first time and needs to ensure that any email traffic coming from the
internal SMTP servers is relayed out through the Cisco ESA and is tied to the Outgoing Mail Policies. Which Mail Flow
Policy setting should be modified to accomplish this goal?
A. Exception List
B. Connection Behavior
C. Bounce Detection Signing
D. Reverse Connection Verification
Correct Answer: B
Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118136-qanda-esa-00.html

QUESTION 7cisco 300-720 exam questions q7

Refer to the exhibit. Which SPF record is valid for mycompany.com?
A. v=spf1 a mx ip4:199.209.31.2 -all
B. v=spf1 a mx ip4:10.1.10.23 -all
C. v=spf1 a mx ip4:199.209.31.21 -all
D. v=spf1 a mx ip4:172.16.18.230 -all
Correct Answer: D

QUESTION 8
What is the order of virus scanning when multilayer antivirus scanning is configured?
A. The default engine scans for viruses first and the McAfee engine scans for viruses second.
B. The Sophos engine scans for viruses first and the McAfee engine scans for viruses second.
C. The McAfee engine scans for viruses first and the default engine scans for viruses second.
D. The McAfee engine scans for viruses first and the Sophos engine scans for viruses second.
Correct Answer: C
If you configure multi-layer anti-virus scanning, the Cisco appliance performs virus scanning with the McAfee engine first
and the Sophos engine second. It scans messages using both engines, unless the McAfee engine detects a virus. If the
McAfee engine detects a virus, the Cisco appliance performs the anti-virus actions (repairing, quarantining, etc.) defined
for the mail policy.
Reference: https://www.cisco.com/c/en/us/td/docs/security/esa/esa12-0/user_guide/b_ESA_Admin_Guide_12_0/b_ESA_Admin_Guide_chapter_01011.html

QUESTION 9
When email authentication is configured on Cisco ESA, which two key types should be selected on the signing profile?
(Choose two.)
A. DKIM
B. Public Keys
C. Domain Keys
D. Symmetric Keys
E. Private Keys
Correct Answer: AC
Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/213939-esa-configure-dkimsigning.html

QUESTION 10
Users have been complaining of a higher volume of emails containing profanity. The network administrator will need to
leverage dictionaries and create specific conditions to reduce the number of inappropriate emails. Which two filters
should be configured to address this? (Choose two.)
A. message
B. spam
C. VOF
D. sender group
E. content
Correct Answer: BE

QUESTION 11
DRAG DROP
Drag and drop the AsyncOS methods for performing DMARC verification from the left into the correct order on the right.
Select and Place:cisco 300-720 exam questions q11

Correct Answer:

cisco 300-720 exam questions q11-1

Reference: https://www.cisco.com/c/en/us/td/docs/security/esa/esa11-1/user_guide/b_ESA_Admin_Guide_11_1/b_ESA_Admin_Guide_11_1_chapter_010101.html

QUESTION 12
Which two steps configure Forged Email Detection? (Choose two.)
A. Configure a content dictionary with executive email addresses.
B. Configure a filter to use the Forged Email Detection rule and dictionary.
C. Configure a filter to check the Header From value against the Forged Email Detection dictionary.
D. Enable Forged Email Detection on the Security Services page.
E. Configure a content dictionary with friendly names.
Correct Answer: AB
Reference: https://explore.cisco.com/esa-feature-enablement/user-guide-for-async-11

QUESTION 13
Which type of query must be configured when setting up the Spam Quarantine while merging notifications?
A. Spam Quarantine Alias Routing Query
B. Spam Quarantine Alias Consolidation Query
C. Spam Quarantine Alias Authentication Query
D. Spam Quarantine Alias Masquerading Query
Correct Answer: B

The free Cisco 300-720 exam practice questions come from a part of the real exam room. You can experience part of the exam content first.
Get the complete 300-720 exam dumps at https://www.lead4pass.com/300-720.html (PDF + VCE) to help you successfully pass the exam.
Lead4Pass has two learning modes: PDF and VCE. You can choose according to your preferences.

ps.
The free Cisco 300-720 exam PDF is shared from Lead4Pass. You can download the practice online. To get the complete Cisco 300-720 exam questions and answers, please choose Lead4Pass.
We update all exam questions and answers in real-time throughout the year to ensure immediate validity.

Cisco exam list with recommendations for all exam questions and answers

Organize the list of cisco exam certifications, share cisco exam questions and answers, and recommend the latest updated Lead4Pass exam dumps!

Cisco Exam List

Cisco certifications are divided into Cisco certifications and Specialist certifications. Share the list of Cisco certification exams and corresponding exam questions and answers, and Cisco Braindumps

Cisco certifications

Entry:

CCT Collaboration

100-890 CLTECH – Supporting Cisco Collaboration System Devices (CLTECH) v1.0 ( Exam Questions And Answer )


CCT Data Center

010-151 DCTECH – Supporting Cisco Data Center System Devices (DCTECH) v3.0 ( Exam Questions And Answer )


CCT Routing & Switching

100-490 RSTECH – Supporting Cisco Routing and Switching Network Devices v3.0 ( Exam Questions And Answer )


Associate:

CyberOps Associate

200-201 CBROPS – Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS) ( Exam Questions And Answer )


DevNet Associate

200-901 DEVASC – Developing Applications and Automating Workflows using Cisco Platforms (DEVASC) ( Exam Questions And Answer )


CCNA

200-301 CCNAImplementing and Administering Cisco Solutions (CCNA) ( Exam Questions And Answer )


Professional:

CCNP Collaboration

350-801 CLCOR – Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) ( Exam Questions And Answer )
300-810 CLICA – Implementing Cisco Collaboration Applications (CLICA) ( Exam Questions And Answer )
300-815 CLACCM – Implementing Cisco Advanced Call Control and Mobility Services (CLACCM) ( Exam Questions And Answer )
300-820 CLCEI – Implementing Cisco Collaboration Cloud and Edge Solutions (CLCEI) ( Exam Questions And Answer )
300-825 CLCNF – Implementing Cisco Collaboration Conferencing (CLCNF) ( Exam Questions And Answer )
300-835 CLAUTO – Implementing Automation for Cisco Collaboration Solutions (CLAUI) ( Exam Questions And Answer )


CyberOps Professional

350-201 CBRCORPerforming CyberOps Using Cisco Security Technologies (CBRCOR) ( Exam Questions And Answer )
300-215 CBRFIR – Conducting Forensic Analysis and Incident Response Using Cisco Technologies for CyberOps (CBRFIR) ( Exam Questions And Answer )


CCNP Data Center

350-601 DCCORImplementing and Operating Cisco Data Center Core Technologies (DCCOR) ( Exam Questions And Answer )
300-610 DCID – Designing Cisco Data Center Infrastructure (DCID) ( Exam Questions And Answer )
300-615 DCIT – Troubleshooting Cisco Data Center Infrastructure (DCIT) ( Exam Questions And Answer )
300-620 DCACIImplementing Cisco Application Centric Infrastructure (DCACI) ( Exam Questions And Answer )
300-625 DCSANConfiguring Cisco MDS 9000 Series Switches (DCMDS) ( Exam Questions And Answer )
300-630 DCACIAImplementing Cisco Application Centric Infrastructure – Advanced (DCACIA) ( Exam Questions And Answer )
300-635 DCAUTO – Implementing Automation for Cisco Data Center Solutions (DCAUI) ( Exam Questions And Answer )


DevNet Professional

350-901 DEVCORDeveloping Applications Using Cisco Core Platforms and APIs (DEVCOR) ( Exam Questions And Answer )
300-435 ENAUTO – Implementing Automation for Cisco Enterprise Solutions (ENAUI) ( Exam Questions And Answer )
300-835 CLAUTO – Implementing Automation for Cisco Collaboration Solutions (CLAUI) ( Exam Questions And Answer )
300-635 DCAUTO – Implementing Automation for Cisco Data Center Solutions (DCAUI) ( Exam Questions And Answer )
300-535 SPAUTO – Implementing Automation for Cisco Service Provider Solutions (SPAUI) ( Exam Questions And Answer )
300-735 SAUTO – Implementing Automation for Cisco Security Solutions (SAUI) ( Exam Questions And Answer )
300-910 DEVOPS – Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS) ( Exam Questions And Answer )
300-915 DEVIOT – Developing Solutions using Cisco IoT and Edge Platforms (DEVIOT) ( Exam Questions And Answer )
300-920 DEVWBX – Developing Applications for Cisco Webex and Webex Devices (DEVWBX) ( Exam Questions And Answer )


CCNP Enterprise

350-401 ENCORImplementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) ( Exam Questions And Answer )
300-410 ENARSIImplementing Cisco Enterprise Advanced Routing and Services (ENARSI) ( Exam Questions And Answer )
300-415 ENSDWIImplementing Cisco SD-WAN Solutions (ENSDWI) ( Exam Questions And Answer )
300-420 ENSLD – Designing Cisco Enterprise Networks (ENSLD) ( Exam Questions And Answer )
300-425 ENWLSD – Designing Cisco Enterprise Wireless Networks (ENWLSD) ( Exam Questions And Answer )
300-430 ENWLSI – Implementing Cisco Enterprise Wireless Networks (ENWLSI) ( Exam Questions And Answer )
300-435 ENAUTO – Implementing Automation for Cisco Enterprise Solutions (ENAUI) ( Exam Questions And Answer )


CCNP Security

350-701 SCORImplementing and Operating Cisco Security Core Technologies (SCOR) ( Exam Questions And Answer )
300-710 SNCFSecuring Networks with Cisco Firepower Next-Generation Firewall (SSNGFW) ( Exam Questions And Answer )
300-715 SISE – Implementing and Configuring Cisco Identity Services Engine (SISE) ( Exam Questions And Answer )
300-720 SESA – Securing Email with Cisco Email Security Appliance (SESA) ( Exam Questions And Answer )
300-725 SWSA – Securing the Web with Cisco Web Security Appliance (SWSA) ( Exam Questions And Answer )
300-730 SVPNImplementing Secure Solutions with Virtual Private Networks (SVPN) ( Exam Questions And Answer )
300-735 SAUTO – Implementing Automation for Cisco Security Solutions (SAUI) ( Exam Questions And Answer )


CCNP Service Provider

350-501 SPCOR – Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) ( Exam Questions And Answer )
300-510 SPRI – Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) ( Exam Questions And Answer )
300-515 SPVI – Implementing Cisco Service Provider VPN Services (SPVI) ( Exam Questions And Answer )
300-535 SPAUTO – Implementing Automation for Cisco Service Provider Solutions (SPAUI) ( Exam Questions And Answer )


Expert:

CCIE Collaboration

Implementing and Operating Cisco Collaboration Core Technologies (CLCOR 350-801)


CCIE Data Center

Implementing and Operating Cisco Data Center Core Technologies (DCCOR 350-601)


CCDE

CCDE written exam (CCDE 352-001)


CCIE Enteprise Infrastructure

Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR 350-401)


CCIE Enterprise Wireless

Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR 350-401)

CCIE Security

Implementing and Operating Cisco Security Core Technologies (SCOR 350-701)


CCIE Service Provider

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR 350-501)

Cisco Specialist certifications

Collaboration:

Cisco Unified Contact Center Enterprise Specialist

500-440 UCCED – Deploying Cisco Unified Contact Center Enterprise (DUCCE) ( Exam Questions And Answer )
500-450 UCCEIS – Administering Cisco Unified Contact Center Enterprise, Part 1 (AUCCE1) And Administering Cisco Unified Contact Center Enterprise, Part 2 (AUCCE2) ( Exam Questions And Answer )

Data Center:

Cisco and NetApp FlexPod Design Specialist

500-173 FPDESIGNDesigning the FlexPod Solution v2.0 (FPDESIGN) ( Exam Questions And Answer )


Cisco and NetApp FlexPod Implementation and Administration Specialist

500-174 FPIMPADMImplementing and Administering the FlexPod Solution v2.0 (FPIMPADM) ( Exam Questions And Answer )

Meraki Solutions:

Cisco Meraki Solutions Specialist

500-220 ECMSEngineering Cisco Meraki Solutions Part 1 (ECMS1) And Engineering Cisco Meraki Solutions Part 2 (ECMS2) ( Exam Questions And Answer )

Customer Success:

Cisco Customer Success Manager

820-605 CSMCisco Customer Success Manager (DTCSM) ( Exam Questions And Answer )


Cisco Renewals Manager

Why certify?

Certifications are proof of knowledge, aptitude, and a lifelong learning mentality that puts you ahead of the competition. Certified employees are highly sought after by hiring managers and are trusted to connect, secure, and automate Cisco networks across the globe.​

Prepare to certify

Step 1: Review Prepare to take your exam by familiarizing yourself with the topics the exam will cover.

Step 2: Study & Train Once you know which topics will be on your exam, choose a studying or training option that works for you.

Step 3: Connect You don’t have to study alone. Join the appropriate Certification Community on the Cisco Learning Store and work alongside others who are studying the same material.

Step 4: Practice Practice through Cisco labs, simulation tools, and sandboxes to reach your certification goals.

Step 5: Assess Take a practice exam to test your readiness and to avoid surprises during the real thing.

Step 6: Schedule test Schedule your exam and take it online from a comfortable location or in person at a convenient Pearson VUE location.

Step 7: Certify Log on to the Certification Tracking System to track your certification status and claim your digital kit. If this was your final exam before certification, congratulations! It’s time to celebrate and tell the world about your accomplishment.

Step 8: Recertify Keep your certification current your skills sharp by participating in our Continuing Education program.

All the Cisco exam questions and answers are sorted out above. You can get Cisco practice test, Cisco Dumps Pdf, Cisco Exam Dumps at https://www.vcecert.com/cisco-dumps/