300-430 ENWLSI exam solutions

Cisco 300-430 dumps participate in actual scene verification, and are really effective 300-430 ENWLSI exam solutions!

How did 300-430 dumps help you pass the 300-430 ENWLSI exam successfully:

  1. Provide ready-to-use exam questions and answers
  2. Easy way to study (PDF + VCE)
  3. Have a data guarantee that accumulates over time (99.5% pass rate)
  4. Short preparation time (2-3 days of exam practice)
  5. Membership validity period (365 days)
  6. Guaranteed (12 years of exam experience)

Now, candidates only need to download 300-430 dumps: https://www.leads4pass.com/300-430.html to get 220 latest exam questions and answers, which are the latest 300-430 ENWLSI exam solutions!

Practice the New Cisco 300-430 dumps exam questions live:

FromNumber of exam questionsPriceAssociated certifications
Lead4Pass15/220 (Full)FreeCCNP Enterprise

Question 1:

A corporation has recently implemented a BYOD policy at its HQ. Which two risks should the security director be concerned about? (Choose two.)

A. network analyzers

B. malware

C. lost and stolen devices

D. keyloggers

E. unauthorized users

Correct Answer: BC

https://ccbtechnology.com/byod-5-biggest-security-risks/ https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom

Question 2:

A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing. Which configuration within the network device configuration should be verified?

A. SNMP RO community

B. device interface credentials

C. device ID

D. shared secret

Correct Answer: D

Question 3:

An engineer must implement intrusion protection in the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which AP mode and submodel must be implemented?

A. Ap mode: local, Ap submodel: WIPS

B. Ap mode: monitor, Ap submodel: WIPS

C. Ap mode: monitor, Ap submodel: none

D. Ap mode: local, Ap submodel: none

Correct Answer: A

The on-channel says no need to scan other channels.

Question 4:

A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the

Trusted Root Certification Authorities are stored on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?

A. There is an IEEE invalid 802.1X authentication policy on the authentication server.

B. The user’s Active Directory account is locked out after several failed attempts.

C. There is an invalid 802.1X authentication policy on the authenticator.

D. The laptop has not received a valid IP address from the wireless controller.

Correct Answer: A

https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_199/Dot1X_Deploy ment/ Dot1x_Dep_Guide.html

Question 5:

DRAG DROP

A network engineer must get an autonomous AP to authenticate to the upstream switch via IEEE 802.1 X. Drag and drop the commands from the left onto the right to complete the configuration.

Select and Place:

new Cisco 300-430 dumps exam questions 5

Correct Answer:

new Cisco 300-430 dumps exam questions 5-1

Question 6:

What are two considerations when deploying a Cisco Hyperlocation? (Choose two.)

A. NTP configuration is available, but not recommended.

B. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.

C. After enabling Cisco Hyperlocation on Cisco CMX, the APs, and the wireless LAN controller must be restarted.

D. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.

Correct Answer: DE

Question 7:

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue?

A. Place the APs to monitor the mode shut down the radios, and then change the Cisco Hyperlocation detection threshold

B. Shut down all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.

C. Disable Cisco Hyperlocation. Change the Cisco Hyperlocation detection threshold and then enable it

D. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WL AN.

Correct Answer: C

Question 8:

An engineer has configured the wireless controller to authenticate clients on the employee SSID against Microsoft Active Directory using PEAP authentication. Which protocol does the controller use to communicate with the authentication server?

A. EAP

B. 802.1X

C. RADIUS

D. WPA2

Correct Answer: C

Question 9:

Refer to the exhibit.

new Cisco 300-430 dumps exam questions 9

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)

A. TSPEC

B. SIFS

C. 802.11e

D. WMM

E. APSD

Correct Answer: CD

The 802.11e, WMM, and Cisco Compatible Extension specifications help balance and prevent the overloading of a cell with audio streams. CAC determines whether there is enough channel capacity to start a call; if not, the phone can scan for another channel https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-9.html

Question 10:

In a Cisco WLAN deployment, it is required that all APs from branch 1 remain operational even if the control plane CAPWAP tunnel is down because of a WAN failure to headquarters.

Which operational mode must be configured on the APs?

A. Disconnected

B. Connected

C. Lightweight

D. Standalone

Correct Answer: D

Question 11:

An engineer is adding APs to an existing VolMLAN to allow for location-based services. Which option will the primary change be to the network?

A. increased transmit power on all APs

B. Moving to a bridging model

C. AP footprint

D. cell overlap would decrease

E. triangulation of devices

Correct Answer: C

Question 12:

Which two events are outcomes of a successful RF jamming attack? (Choose two.)

A. disruption of WLAN services

B. unauthentication association

C. deauthentication broadcast

D. deauthentication multicast

E. physical damage to AP hardware

Correct Answer: AE

https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/72/wIPS_Configuration/Guide/wIPS_7 2/ msecg_appA_wIPS.html#wp1345929

Question 13:

An engineer is deploying a virtual MSE. The network has 3000 APs and needs 7000 IPS licenses. To which size server does the engineer scale it?

A. virtual

B. standard

C. high end

D. low end

Correct Answer: C

Question 14:

An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?

A. Enable hyperlocation services for RFID.

B. Enable RFID tags in tracking options

C. Enable probing clients for active tags.

D. Define an RFID group globally and add the tags.

Correct Answer: B

Question 15:

An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server.

Which two details need to be configured on the AP to allow the communicator? between the server and the AP? (Choose two.)

A. RADIUS IP address

B. Username and password

C. Group name

D. Shared secret

E. PAC encryption key

Correct Answer: AB


Download the complete 300-430 ENWLSI exam solution:

300-430 ENWLSI exam solutions220 Questions and Answers300-430 dumps (PDF +VCE)
https://www.leads4pass.com/300-430.html

The 300-430 dumps provided by Lead4Pass are really effective 300-430 ENWLSI exam solutions!

Candidates can rest assured to use Lead4Pass 300-430 dumps to help themselves succeed in the exam! It contains 220 latest exam questions and answers, verified by a team of experts to verify the real and effective materials that have been actually reviewed, and fully meet the success conditions of the 300-430 ENWLSI exam.