[2018 Newest] Latest Cisco 200-105 Dumps Materials ICND2 200-105 Dumps VCE Youtube (Q1-Q20)

Practice for your Cisco 200-105 exam with the help of lead4pass, useful latest Cisco ICND2 200-105 dumps vce youtube demo update free shared. “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)” is the name of Cisco ICND2 https://www.leads4pass.com/200-105.html exam dumps which covers all the knowledge points of the real Cisco exam.

Get your Cisco ICND2 200-105 dumps exam preparation questions in form of 200-105 PDF. If you want to get success with good grades then these 200-105 ICND2 – Cisco dumps exam question and answers are splendid platform for you I personally review this web many times that’s why I am suggesting you this one.

Vendor: Cisco
Certifications: ICND2
Exam Name: Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Exam Code: 200-105
Total Questions: 310 Q&As

Download free Cisco 200-105 dumps pdf: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

Download free Cisco 200-310 dumps pdf: https://drive.google.com/open?id=0B_7qiYkH83VROXBqSzZWaThrVlE

Cisco CCNP Service Provider 642-883 dumps exam training resources and Cisco 642-883 dumps vce youtube update. Download the best useful Cisco ICND2 200-105 dumps vce software online free try.
200-105 dumps

Latest Cisco ICND2 200-105 Dumps Exam Questions And Answers (Q1-Q20)

QUESTION 1
Which command can be used from a router to verify the Layer 3 path to a host?
A. tracert address
B. traceroute address
C. telnet address
D. ssh address
Correct Answer: B

QUESTION 2
A network administrator has configured access list 173 to prevent Telnet and ICMP traffic from reaching a server with the address of 192.168.13.26. Which commands can the administrator issue to verify that the access list is working properly? (Choose three.)
A. Router# ping 192.168.13.26
B. Router# debug access-list 173
C. Router# show open ports 192.168.13.26
D. Router# show access-lists
E. Router# show ip interface
Correct Answer: ADE

QUESTION 3
When troubleshooting Ethernet connectivity issues, how can you verify that an IP address is known to a router?
A. Check whether the IP address is in the routing table
B. Check whether an ACL is blocking the IP address
C. Check whether the IP address is in the CAM table
D. Check whether the IP address is in the ARP table
Correct Answer: D

QUESTION 4
Refer to the exhibit.
200-105 dumps
Assuming that the entire network topology is shown, what is the operational status of the interfaces of R2 as indicated by the command output shown?
A. One interface has a problem.
B. Two interfaces have problems.
C. The interfaces are functioning correctly.
D. The operational status of the interfaces cannot be determined from the output shown.
Correct Answer: C

Explanation:
R2 has setup with two interface s0/1 and fa0/0 and both are interfaces configured with IP address and up. “show ip interface brief” showing the status of R2 interfaces.

QUESTION 5
Which two steps must you perform on each device that is configured for IPv4 routing before you implement OSPFv3? 200-105 dumps (Choose two)
A. configure an autonomous system number
B. configure a loopback interface
C. configure a router ID
D. Enable IPv6 on an interface
E. Enable IPv6 unicast routing
Correct Answer: CE

QUESTION 6
200-105 dumps
200-105 dumps
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The serial connection to the NorthCoast branch office.
B. The serial connection to the North branch office.
C. The serial connection to the Southlands branch office.
D. The serial connection to the Multinational Core.
Correct Answer: B

Explanation:
Cisco default encapsulation is HDLC which is by default enabled on all cisco router. If we want to enable other encapsulation protocol (PPP,X.25 etc) we need to define in interface setting. But here except s1/1 all interface defined by other encapsulation protocol so we will assume default encapsulation running on s1/1 interface and s1/1 interface connected with North

QUESTION 7
Which statement about access lists that are applied to an interface is true?
A. You can place as many access lists as you want on any interface.
B. You can apply only one access list on any interface.
C. You can configure one access list, per direction, per Layer 3 protocol.
D. You can apply multiple access lists with the same protocol or in different directions.
Correct Answer: C

QUESTION 8
Which two statements about MPLS are true ?
A. it encapsulates all traffic in an ipv4 header
B. it provides automatic authentication
C. it uses labels to separate and forward customer traffic
D. it can carry multiple protocols, including ipv4 and ipv6
E. it tags customer traffic using 802.1q
Correct Answer: CD

QUESTION 9
Which technology can provide security when connection multiple sites across the internet?
A. EBGP
B. DMVPN
C. Site-to-site vpn
D. MPLS
Correct Answer: B

QUESTION 10
Which protocol is a Cisco proprietary implementation of STP?
A. CST
B. RSTP
C. MSTP
D. PVST+
Correct Answer: D

QUESTION 11
How can you manually configure a switch so that it is selected as the root Switch?
A. increase the priority number
B. lower the port priority number
C. lower the priority number
D. increase the port priority number
Correct Answer: C

QUESTION 12
Which three describe the reasons large OSPF networks use a hierarchical design? (Choose Three)
A. to speed up convergence
B. to reduce routing overhead
C. to lower costs by replacing routers with distribution layer switches
D. to decrease latency by increasing bandwidth
E. to confine network instability to single areas of the network
F. to reduce the complexity of router configuration
Correct Answer: ABE

QUESTION 13
Which function does traffic shaping perform?
A. it buffers traffic without queuing it
B. it queues traffic without buffering it
C. it drops packets to control the output rate
D. it buffers and queues excess packets
Correct Answer: D

QUESTION 14
Which of the port is not part of STP protocol?
A. Listening
B. Learning
C. Forwarding
D. Discarding
Correct Answer: D

QUESTION 15
Which functionality does an SVI provide?
A. OSI Layer 2 connectivity to switches
B. remote switch administration
C. traffic routing for VLANs
D. OSI Layer 3 connectivity to switches
Correct Answer: C

QUESTION 16
If two OSPF neighbors have formed complete adjacency and are exchanging link-state advertisements, which state have they reached?
A. Exstart
B. 2-Way
C. FULL
D. Exchange
Correct Answer: C

QUESTION 17
Which one of these is a valid HSRP Virtual Mac Address? 200-105 dumps
A. 0000.0C07.AC15
B. 0000.5E00.01A3
C. 0007.B400.AE01
D. 0007.5E00.B301
Correct Answer: A

QUESTION 18
Assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?
A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005
Correct Answer: A

QUESTION 19
Which command do use we to see SNMP version?
A. show snmp pending
B. show snmp enginelD
C. snmp-server something
Correct Answer: A

QUESTION 20
While troubleshooting a connection problem on a computer,you determined that the computer can ping a specific web server but it cannot connect to TCP port 80 on that server.
Which reason for the problem is most likely ture?
A. A VLAN number is incorrect
B. An ARP table entry is missing
C. A route is missing
D. An ACL is blocking the TCP port
Correct Answer: D

Download free Cisco 200-105 dumps pdf: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

Download free Cisco 200-310 dumps pdf: https://drive.google.com/open?id=0B_7qiYkH83VROXBqSzZWaThrVlE

With the help of latest and authentic Cisco ICND2 200-105 dumps exam questions, you can find the best 200-105 exam preparation kit here https://www.leads4pass.com/200-105.html from lead4pass and you will also get the 100% guarantee for passing the Cisco exam. It is the best choice for you to pass Cisco 200-105 exam.

High quality Cisco 200-105 dumps vce youtube: https://youtu.be/Chcw8Ma3xJk