20Sep
Latest updated DevNet Associate 200-901 dumps from Lead4Pass

Candidates use the latest updated DevNet Associate 200-901 dumps from Lead4Pass: https://www.lead4pass.com/200-901.html, to help you get past the hurdle and successfully pass the 200-901 DEVASC exam.

Lead4Pass 200-901 dumps provide PDF files and a VCE exam engine to help you practice 200-901 DEVASC exam questions quickly and easily. The latest updated 200-901 dumps contain 294 exam questions and answers, verified by IT experts to be true and effective.

Share 13 DevNet Associate 200-901 dumps PDF:https://drive.google.com/file/d/1hqDUcvc1vHJMiDa15KhDD1Jjp3q8j0hA/

Read DevNet Associate 200-901 dumps exam questions and answers online:

New Question 1:

How does requesting a synchronous API operation differ from requesting an asynchronous API operation?

A. clients receive responses with a task id for further processing

B. clients subscribe to a webhook for operation results

C. clients poll for the status of the execution of operations

D. clients can access the results immediately

Correct Answer: C

New Question 2:

What are two advantages of YANG-based approaches for infrastructure automation? (Choose two.)

A. multi-platform vendor abstraction

B. compiles to executables that run on network devices

C. designed to reflect networking concepts

D. directly maps to JavaScript

E. command line is driven interface

Correct Answer: AC

New Question 3:

Which device is used to transport traffic from one broadcast domain to another broadcast domain?

A. layer 2 switch

B. proxy server

C. router

D. load balancer

Correct Answer: C

New Question 4:

Which service provides a directory lookup for IP addresses and host names?

A. DNS

B. NAT

C. SNMP

D. DHCP

Correct Answer: A

New Question 5:

Users cannot access a web server and after the traffic is captured, the capture tool shows an ICMP packet that reports “time exceeded in-transit”. What is the cause of this webserver access issue?

A. A router along the path has the wrong time.

B. A router along the path is misrouting the packets in the wrong direction.

C. The server is too loaded and the connection could not be handled in time.

D. The server is too far away and the packets require too much time to reach it.

Correct Answer: B

New Question 6:

Refer to the exhibit.

DevNet Associate 200-901 dumps exam q6

What is the value of the node defined by this YANG structure?

DevNet Associate 200-901 dumps exam q6-1

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: D

New Question 7:

What is used in Layer 2 switches to direct packet transmission to the intended recipient?

A. MAC address

B. IPv6 address

C. spanning tree D. IPv4 address

Correct Answer: A

New Question 8:

Refer to the exhibit.

DevNet Associate 200-901 dumps exam q8

What is the result of executing this Ansible playbook?

A. The playbook copies a new start-up configuration to CISCO_ROUTER_01

B. The playbook copies a new running configuration to CISCO_ROUTER_01

C. The playbook backs up the running configuration of CISCO_ROUTER_01

D. The playbook backs up the start-up configuration of CISCO_ROUTER_01

Correct Answer: D

New Question 9:

A 401 HTTP response code is returned when calling a REST API. What is the error state identified by this response code?

A. The server cannot process the request as it has detected an issue in the request syntax or body.

B. The request has not been accepted because it requires authentication.

C. The sever accepted the request but the client is not authorized for this content.

D. The server cannot find the requested resource because the path specified is incorrect.

Correct Answer: B

Reference: https://blog.restcase.com/rest-api-error-codes-101/#:~:text=A%20401%20error%20response% 20indicates,credentials%20or%20none%20at%20all.

New Question 10:

What is the first development task in test-driven development?

A. Write code that implements the desired function.

B. Write a failing test case for the desired function.

C. Reverse engineer the code for the desired function.

D. Write a passing test case for existing code.

Correct Answer: B

Reference: https://technologyconversations.com/2013/12/20/test-driven-development-tdd-example- walkthrough/

New Question 11:

What is the purpose of a firewall in application deployment?

A. adds TLS support to an application that does not support it natively

B. limits traffic to only ports required by the application

C. provides translation for an application\’s hostname to its IP address

D. forwards traffic to a pool of instances of the application

Correct Answer: B

New Question 12:

A small company has 5 servers and 50 clients. What are two reasons an engineer should split this network into separate client and server subnets? (Choose two.)

A. Subnets will split domains to limit failures.

B. A router will limit the traffic types between the clients and servers.

C. Subnets provide more IP address space for clients and servers.

D. A router will bridge the traffic between clients and servers.

E. Internet access to the servers will be denied on the router.

Correct Answer: AB

New Question 13:

How does a developer create and switch to a new branch called “my-bug-fix” to develop a product fix?

A. git checkout -b my-bug-fix

B. git branch -b my-bug-fix

C. git branch my-bug-fix

D. git checkout my-bug-fix

Correct Answer: C

Reference: https://www.dnnsoftware.com/community-blog/cid/155105

New Question 14:

What operation is performed with YANG model-driven programmability in NX-OS?

A. configure a device with native and OpenConfig-based models

B. bootstrap a device that has a factory-default configuration

C. send CLI commands to a device and retrieve output in JSON format

D. run Linux commands natively on the device

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white- paper-c11-741518.html

New Question 15:

What is the function of an IP address in networking?

A. represents a network connection on specific devices

B. specifies the type of traffic that is allowed to roam on a network

C. specifies the resource\’s location and the mechanism to retrieve it

D. represents the unique ID that is assigned to one host on a network

Correct Answer: D

…

Download 13 DevNet Associate 200-901 dumps PDF:https://drive.google.com/file/d/1hqDUcvc1vHJMiDa15KhDD1Jjp3q8j0hA/

Candidates studying the DevNet Associate 200-901 dumps exam questions above can help them improve their exam experience, but this is only a warm-up.

You are welcome to download the latest updated DevNet Associate 200-901 dumps: https://www.lead4pass.com/200-901.html, A truly effective route for candidates to pass the 200-901 DEVASC exam.
13Sep
Cisco 500-220 ECMS exam candidates can successfully pass the exam with the latest version of the 500-220 dumps

The latest version of 500-220 dumps released today, proven, correct, and effective, candidates can use the PDF and VCE exam tools provided by Lead4Pass to help you practice all exam questions, guaranteeing you 100% success in passing the Cisco 500-220 ECMS exam (Engineering Cisco Meraki Solutions).

All candidates taking the Cisco 500-220 ECMS exam can download the latest version of the 500-220 dumps online: https://www.lead4pass.com/500-220.html. And take advantage of the discount code “Cisco” for the lowest price on the Internet “.

The latest Cisco 500-220 Dumps exam questions are shared online:

Number of exam questionsUpdate timeExamPrevious issue
15Sep 13, 2022Cisco Meraki Solutions Specialist (500-220)Apr 26, 2022
Question 1:
500-220 dumps questions 1

Refer to the exhibit. Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class.

B. WebEx traffic will prefer WAN 1 as it is the primary uplink.

C. WebEx traffic will prefer WAN 2 as long as it is up.

D. WebEx traffic will be load-balanced between both active WAN links.

Check answer >>

Question 2:
500-220 dumps questions 2

Refer to the exhibit. Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)

A. Change the primary uplink to “none”.

B. Add an internet traffic preference that defines the load-balancing ratio as 4:1.

C. Enable load balancing.

D. Set the speed of the cellular uplink to zero.

E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.

Check answer >>

Question 3:

Which Cisco Meraki best practice method preserves complete historical network event logs?

A. Configuring the preserved event number to maximize logging.

B. Configuring the preserved event period to unlimited.

C. Configuring a Syslog server for the network.

D. Configuring Dashboard logging to preserve only certain event types.

Check answer >>

Question 4:

Which design requirement is met by implementing Syslog versus SNMP?

A. when automation capabilities are needed

B. when proactive alerts for critical events must be generated

C. when organization-wide information must be collected

D. when information such as flows and client connectivity must be gathered

Check answer >>

Question 5:
500-220 dumps questions 5

Refer to the exhibit. A packet arrives on the VPN concentrator with source IP 10.168.70.3 and is destined for IP 10.116.32.4. What is the next hop for the packet, based on this concentrator routing table?

A. The concentrator gateway (10.128.124.62) is the next hop.

B. Not enough detail is available to determine the next hop.

C. The packet is stopped.

D. The Auto VPN peer “Store 1532 ? appliance” is the next hop.

Check answer >>

Question 6:

Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager. Which outcome occurs when a user attempts to remove the “Meraki Management” profile on an iPad?

A. The “Meraki Management” profile cannot be removed.

B. The “Meraki Management” profile is removed and then pushed automatically by the Systems Manager.

C. The “Meraki Management” profile is removed. All the profiles that Systems Manager pushed are also removed.

D. The “Meraki Management” profile is removed. All the profiles Systems Manager pushed remain.

Check answer >>

Question 7:
500-220 dumps questions 7

Refer to the exhibit. What are the Loss and Average Latency statistics based on?

A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page

B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security and SD-WAN > Firewall page

C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security and SD-WAN > SD-WAN and Traffic Shaping page

D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page

Check answer >>

Question 8:

In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

A. Renew the Dashboard license.

B. License a network.

C. License more devices.

D. Call Meraki support.

E. Wait for the devices to auto-renew.

Check answer >>

Question 9:

What are two ways peers interact with ports that Auto VPN uses? (Choose two.)

A. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.

B. Peers contact the VPN registry at UDP port 9350.

C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.

D. Peers contact the VPN registry at TCP port 9350.

E. For IPsec tunneling, peers use UDP ports 500 and 4500.

Check answer >>

Question 10:

What occurs when a configuration change is made to an MX network that is bound to a configuration template?

A. The configuration change in the bound network is combined with the template configuration inside the template.

B. The more restrictive configuration is preferred.

C. The configuration change in the bound network overrides the template configuration.

D. The template configuration overrides the configuration change in the bound network.

Check answer >>

Question 11:

One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based on client count, how many APs (rounded to the nearest whole number) are needed?

A. 26

B. 28

C. 30

D. 32

Check answer >>

Question 12:
500-220 dumps questions 12

Refer to the exhibit. For an AP that displays this alert, which network access control method must be in use?

A. preshared key

B. WPA2-enterprise with my RADIUS server

C. splash page with my RADIUS server

D. MAC-based access control with RADIUS server

Check answer >>

Question 13:

Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?

A. Wireless > Configure > Access Control

B. Wireless > Configure > Splash page

C. Wireless > Configure > Firewall and Traffic Shaping

D. Wireless > Configure > SSIDs

Check answer >>

Question 14:
500-220 dumps questions 14

Refer to the exhibit. What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

A. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.

B. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.

C. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.

D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

Check answer >>

Question 15:

What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?

A. The Dashboard generates the SAML request.

B. The Dashboard provides user access credentials.

C. The Dashboard parses the SAML request and authenticates users.

D. The Dashboard generates the SAML response.

Check answer >>

Verify the answer:
Numbers:Q1Q2Q3Q4Q5Q6Q7Q8Q9Q10Q11Q12Q13Q14Q15
Answers:BBCADBCBACBCACAADA

The above Cisco 500-220 Dumps exam contains 15 questions that you can practice to improve yourself. The latest version of the 500-220 dumps, updated in September 2022, contains 57 exam questions and answers that candidates can practice to help them successfully pass Cisco 500-220 ECMS exam. You are welcome to use the latest version of 500-220 dumps https://www.lead4pass.com/500-220.html. Escort your career leap.

Copyright © 2023 IT Exam Dumps with PDF and VCE, 100% Pass Guaranteed! | Powered by Fiona WordPress Theme