11Jan
Latest Lead4pass 500-220 dumps with PDF and VCE For 2023

Lead4pass 500-220 dumps contain 57 latest exam questions with answers for the 2023 Cisco Meraki Solutions Specialist certification exam.

Lead4pass 500-220 dumps with PDF and VCE lightweight tools to improve learning progress and facilitate candidates to learn.

Download the latest 500-220 dumps for 2023: https://www.lead4pass.com/500-220.html, 100% guaranteed to pass the Cisco Meraki Solutions Specialist certification exam.

Share a part of the latest 500-220 dumps exam questions and answers for free to read online:

Number of exam questionsExam nameExam codeLast updated
15Cisco Meraki Solutions Specialist500-220500-220 dumps
Question 1:

When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz-only client device from associating to the WLAN for the first time?

A. Content filtering

B. Bridge mode

C. 802.11r

D. Dual band operating with Band Steering

Correct Answer: D

Question 2:
500-220 dumps questions 2

Refer to the exhibit. This Dashboard organization uses a Co-Termination licensing model.

What happens when an additional seven APs are claimed on this network without adding licenses?

A. All APs immediately stop functioning.

B. All network devices stop functioning in 30 days.

C. One AP Immediately stops functioning.

D. All APs stop functioning in 30 days.

Correct Answer: B

Question 3:

How is high availability supported for Cisco Meraki devices?

A. Only the MX Security Appliances that use VRRP support high availability.

B. An active/active high-availability pair is recommended for MX Security Appliances.

C. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high-availability pair.

D. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high-availability pair.

Correct Answer: A

Reference: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

Question 4:

Air Marshal has contained a malicious SSID.

What are the two effects on connectivity? (Choose two.)

A. Currently associated clients stay connected.

B. New clients can connect.

C. Currently associated clients are affected by restrictive traffic shaping rules.

D. New clients cannot connect.

E. Currently associated clients are disconnected.

Correct Answer: DE

Question 5:
500-220 dumps questions 5

Refer to the exhibit. For an AP that displays this alert, which network access control method must be in use?

A. preshared key

B. WPA2-enterprise with my RADIUS server

C. splash page with my RADIUS server

D. MAC-based access control with a RADIUS server

Correct Answer: A

Question 6:

One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based on the client count, how many APs (rounded to the nearest whole number) are needed?

A. 26

B. 28

C. 30

D. 32

Correct Answer: C

Question 7:

A customer wants to use Microsoft Azure to host corporate application servers.

Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?

A. malware protection

B. SD-WAN

C. next-generation firewall

D. intrusion prevention

Correct Answer: C

Question 8:

Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

A. MS Switch

B. Meraki Insight

C. MR Access Point

D. MV Smart Camera

Correct Answer: C

Reference: https://meraki.cisco.com/blog/tag/systems-manager/page/4/

Question 9:

In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

A. Renew the Dashboard license.

B. License a network.

C. License more devices.

D. Call Meraki support.

E. Wait for the devices to auto-renew.

Correct Answer: AC

Reference: https://documentation.meraki.com/General_Administration/Licensing/Meraki_Co-Termination_Licensing_Overview

Question 10:

DRAG DROP

Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.

Select and Place:

500-220 dumps questions 10

Correct Answer:

500-220 dumps questions 10-1

Question 11:

DRAG DROP

Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.

Select and Place:

500-220 dumps questions 11

Correct Answer:

500-220 dumps questions 11-1

Question 12:

A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in the event log and do not install the application. What does the “NotNow” event indicate?

A. The application requires the most recent iOS version.

B. The device is locked with a passcode.

C. The device cannot connect to Apple servers.

D. The device cannot connect to Cisco Meraki servers.

Correct Answer: B

Reference: https://community.meraki.com/t5/Mobile-Device-Management/Check-NotNow-Status/td-p/3887

Question 13:

What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?

A. manual

B. Apple Configurator

C. Sentry enrollment

D. DEP

Correct Answer: B

Reference: https://meraki.cisco.com/lib/pdf/meraki_whitepaper_ios.pdf

Question 14:
500-220 dumps questions 14

Refer to the exhibit. Which IDS/IPS mode is the MX Security Appliance configured for?

A. quarantine

B. prevention

C. detection

D. blocking

Correct Answer: B

Question 15:

A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. How many tunnels do each hub need to support?

A. 52

B. 54

C. 100

D. 104

Correct Answer: C

…

Lead4pass 500-220 dumps contain 57 latest exam questions and answers, reviewed by the Cisco professional team to ensure authenticity and effectiveness, welcome to use 2023 500-220 dumps: https://www.lead4pass.com/500-220.html Ensure Cisco Meraki Solutions Specialist Certification Exam Success on First Try in 2023.
3Jan
Latest Lead4Pass 200-301 dumps for the 2023 CCNA exam
ccna exam 2023

Hello, 2023!

Hello, CCNA exam!

Lead4Pass 200-301 Dumps solves puzzles for all candidates and contains 1017 latest CCNA exam questions and answers to help you pass the 2023 exam with 100% success.

All candidates can choose to use Lead4Pass 200-301 dumps: https://www.lead4pass.com/200-301.html with 200-301 dumps PDF, 200-301 dumps VCE, or PDF+VCE for efficient learning Latest CCNA exam questions.

ccna 200-301 exam questions and answers

Read 2023 Lead4Pass 200-301 dumps exam questions and answers:

Number of exam questionsExam nameExam codeLast updated
15Implementing and Administering Cisco Solutions (CCNA)200-301200-301 dumps
Question 1:

Refer to the exhibit. Which two prefixes are included in this routing table entry? (Choose two.)

R2#show IP routeC 192.168.1.0/26 is directly connected, FastEthernet0/1

A. 192.168.1.17

B. 192.168.1.61

C. 192.168.1.64

D. 192.168.1.127

E. 192.168.1.254

Correct Answer: BC

Question 2:

Refer to the exhibit. R5 is the current DR on the network, and R4 is the BDR. Their interfaces are flapping, so a network engineer wants the OSPF network to elect a different DR and BDR. Which set of configurations must the engineer implement?

200-301 dumps questions 2

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: D

Question 3:

Refer to the exhibit.

200-301 dumps questions 3

SW2 is replaced due to a hardware failure. A network engineer starts to configure SW2 by copying the Fa0/1 interface configuration from SW1. Which command must be configured on the Fa0/1 interface of SW2 to enable PC1 to connect to PC2?

A. switchport mode trunk

B. switchport trunk native VLAN 10

C. switchport trunk allowed remove 10

D. switchport mode access

Correct Answer: A

Question 4:

Which WAN topology has the highest degree of reliability?

A. full mesh

B. Point-to-point

C. hub-and-spoke

D. router-on-a-stick

Correct Answer: A

Question 5:

DRAG DROP Drag and drop the 802.11 wireless standards from the left onto the matching statements on the right

Select and Place:

200-301 dumps questions 5

Correct Answer:

200-301 dumps questions 5-1

Question 6:

Which WPA3 enhancement protects against hackers viewing traffic on the Wi-Fi network?

A. SAE encryption

B. TKIP encryption

C. scrambled encryption key

D. AES encryption

Correct Answer: A

Question 7:

What is the authoritative source for an address lookup?

A. a recursive DNS search

B. the operating system cache

C. the ISP local cache

D. the browser cache

Correct Answer: A

Question 8:

In software-defined architectures, which plane is distributed and responsible for traffic forwarding?

A. management plane

B. control plane

C. policy plane

D. data plane

Correct Answer: D

Question 9:

Refer to the exhibit. The link between PC1 and the switch is up, but it is performing poorly. Which interface condition is causing the performance problem?

200-301 dumps questions 9

A. There is an issue with the fiber on the switch interface.

B. There is a duplex mismatch on the interface.

C. There is an interface type mismatch.

D. There is a speed mismatch on the interface.

Correct Answer: B

Question 10:

Refer to the exhibit. After you apply the given configurations to R1 and R2 you notice that OSPFv3 fails to start.

200-301 dumps questions 10

A. The area numbers on R1 and R2 are mismatched

B. The IPv6 network addresses on R1 and R2 are mismatched

C. The autonomous system numbers on R1 and R2 are mismatched

D. The router on R1 and R2 are mismatched

Correct Answer: A

Question 11:

Refer to the exhibit.

200-301 dumps questions 11

The following must be considered:

1.

SW1 is fully configured for all traffic

2.

The SW4 and SW9 links to SW1 have been configured

3.

The SW4 interface Gi0/1 and Gi0/0 on SW9 have been configured

4.

The remaining switches have had all VLANs added to their VLAN database

Which configuration establishes a successful ping from PC2 to PC7 without interruption to traffic flow between other PCs?

200-301 dumps questions 11-1

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: C

Question 12:

Which action is taken by the switch port enabled for PoE power classification override?

A. If a monitored port exceeds the maximum administrative value for power, the port is shut down and err-disabled.

B. When a powered device begins drawing power from a PoE switch port, a Syslog message is generated.

C. As power usage on a PoE switch port is checked, data flow to the connected device is temporarily paused.

D. If a switch determines that a device is using less than the minimum configured power, it assumes the device has failed and disconnects it.

Correct Answer: A

PoE monitoring and policing compare the power consumption on ports with the administrative maximum value (either a configured maximum value or the port\’s default value). If the power consumption on a monitored port exceeds the administrative maximum value, the following actions occur:

-A Syslog message is issued.

–

The monitored port is shut down and error-disabled.

–

The allocated power is freed.

Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/power_over_ethernet.pdf

Question 13:
200-301 dumps questions 13

Refer to the exhibit. An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)

A. R1(config)# interface fa0/0 R1(config-if)# ip helper-address 198.51.100.100

B. R2(config)# interface gi0/0 R2(config-if)# ip helper-address 198.51.100.100

C. R1(config)# interface fa0/0 R1(config-if)# ip address DHCP R1(config-if)# no shutdown

D. R2(config)# interface gi0/0 R2(config-if)# ip address DHCP

E. R1(config)# interface fa0/0 R1(config-if)# ip helper-address 192.0.2.2

Correct Answer: BC

Question 14:

What does physical access control regulate?

A. access to spec file networks based on business function

B. access to servers to prevent malicious activity

C. access 😮 computer networks and file systems

D. access to networking equipment and facilities

Correct Answer: D

Question 15:

What protocol allows an engineer to back up 20 network router configurations globally while using the copy function?

A. SMTP

B. SNMP

C. TCP

D. FTP

Correct Answer: B

…

Hello, CCNA exam candidates:

Download CCNA 200-301 dumps: https://www.lead4pass.com/200-301.html Study the latest 200-301 exam questions and answers to prepare you for passing the CCNA exam in 2023.
3Jan
Latest Lead4Pass 300-420 dumps for 300-420 ENSLD exam 2023
300-420 ENSLD exam 2023

Lead4Pass 300-420 dumps prepare 225 latest exam questions and answers for candidates taking the 300-420 ENSLD exam, the most effective solution for 2023.

To successfully pass the 300-420 ENSLD exam in 2023, download Cisco 300-420 dumps: https://www.lead4pass.com/300-420.html, and provide PDF and VCE learning tools to help candidates improve efficiency.

300-420 exam questions and answers 2023

Read some Lead4Pass 300-420 dumps exam questions and answers online:

Number of exam questionsExam nameExam codeLast updated
15Designing Cisco Enterprise Networks (ENSLD)300-420300-420 dumps
Question 1:

Which consideration must be taken into account when using the DHCP relay feature in a Cisco SD-Access Architecture?

A. DHCP-relay must be enabled on fabric edge nodes to provide the correct mapping of DHCP scope to the local anycast gateway.

B. A DHCP server must be enabled on the border nodes to allow subnets to span multiple fabric edges.

C. DHCP servers must support Cisco SD-Access extensions to correctly assign IPs to endpoints in an SD-Access fabric with anycast gateway.

D. DHCP Option-82 must be enabled to map the circuit IP option to the access fabric node where the DHCP discovery originated.

Correct Answer: D

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/tech_notes/sda_dhcp/b_cisco_sda_dhcp.html

Question 2:

Which design consideration must be made when dual vEdge routers are deployed at a branch site?

A. Use BGP AS-path prepending to influence egress traffic and use MED to influence ingress traffic from the branch.

B. HSRP priorities must match the OMP routing policy to prefer one vEdge over the other.

C. Traffic must be symmetrical as it egresses the vEdges and returns from remote sites for DPI to function properly.

D. Configure BFD between vEdge routers to detect sub-second link failures.

Correct Answer: A

Question 3:

How are wireless endpoints registered in the HTDB in a Cisco SD-Access architecture?

A. Fabric edge nodes update the HTDB based on CAPPWAP messaging from the AP

B. Fabric WLCs update the HTDB as new clients connect to the wireless network

C. Border nodes first register endpoints and then update the HTDB

D. Fabric APs update the HTDB with the clients\’ ElD and RLOC

Correct Answer: B

Question 4:

Refer to the exhibit.

300-420 dumps questions 4

The full EIGRP routing table is advertised throughout the network. Currently, users experience data loss when any one link in the network fails. An architect must optimize the network to reduce the impact when a link fails. Which solution should the architect include in the design?

A. Run BFD on the interlinks between EIGRP neighbors.

B. Summarize the access layer networks from each access layer switch toward the aggregation layer.

C. Reduce the default EIGRP hello interval and hold time.

D. Summarize the access layer networks from the aggregation layer toward the core layer.

Correct Answer: A

Question 5:

Which OSPF area blocks LSA Type 3, 4, and 5, but allows a default summary route?

A. normal

B. stub

C. NSSA

D. totally stubby

Correct Answer: D

Question 6:

An engineer uses Postman and YANG to configure a router with: OSPF process ID 400 network 192.168.128.128/25 enabled for Area 0

Which get-config reply verifies that the model set was designed correctly?

300-420 dumps questions 6

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: B

Question 7:

In an SD-WAN architecture, which methods are used to bootstrap a vEdge router?

A. DHCP options or manual configuration

B. manage or DNS records

C. ZTP or manual configuration

D. DNS records or DHCP options

Correct Answer: C

Question 8:

Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery?

A. Auto-RP

B. Anycast-RP

C. bootstrap router

D. static RP

Correct Answer: C

Question 9:

Refer to the exhibit. An architect must create a stable and scalable EIGRP solution for a customer. The design must:

1.

conserve bandwidth, memory, and CPU processing

2.

prevent suboptimal routing

3.

avoid any unnecessary queries

Which two solutions must the architect select? (Choose two.)

300-420 dumps questions 9

A. route summarization

B. prefix lists

C. distribute lists

D. stub routing

E. static redistribution

Correct Answer: AC

Question 10:

Which two functions are provided by the Cisco SD-WAN orchestration plane? (Choose two.)

A. centralized provisioning

B. primary authentication point

C. NAT traversal facilitation

D. Zero Touch Provisioning

E. troubleshooting and monitoring

Correct Answer: BC

Question 11:

At which layer does Cisco Express Forwarding use adjacency tables to populate addressing information?

A. Layer4

B. Layer 2

C. Layer 1

D. Layer 3

Correct Answer: B

Question 12:

Refer to the exhibit. An engineer is designing a BGP solution for a client that peers with ISP1 for full Internet connectivity and with ISP2 for direct exchange of routes for several third parties. Which action, when implemented on the edge routers, enables the client network to reach the Internet through ISP1?

300-420 dumps questions 12

A. Run an eBGP session within different VRFs for each ISP.

B. Advertise a default route for downstream routers within the client network.

C. Apply the AS-path prepend feature for ISP2.

D. Apply route filtering such that the client advertises only routes originating from its own AS.

Correct Answer: B

Question 13:

DRAG DROP

Drag and drop the characteristics from the left onto the Yang model they describe on the right.

Select and Place:

300-420 dumps questions 13

Correct Answer:

300-420 dumps questions 12-1

Question 14:

Which PIM mode uses a shared tree only?

A. bidirectional

B. sparse

C. dense

D. source-specific

Correct Answer: A

In bidirectional mode, traffic is routed only along a bidirectional shared tree that is rooted at the rendezvous point (RP) for the group https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-tech-oview.html

Question 15:

What is the purpose of a Cisco SD-Access underlay network?

A. to abstract IP-based connectivity from physical connectivity

B. to emulate LAN segments to transport Layer 2 frames over a Layer 3 network

C. to establish physical connectivity between switches and routers

D. to provide virtualization by encapsulating network traffic over IP tunnels

Correct Answer: C

…

If the 300-420 ENSLD exam is your plan in 2023, then please use Lead4Pass 300-420 dumps: https://www.lead4pass.com/300-420.html, to help you pass successfully on the first try.

Copyright © 2023 IT Exam Dumps with PDF and VCE, 100% Pass Guaranteed! | Powered by Fiona WordPress Theme